 |
Raspberry Pi's health is at risk |
| This is not a drill! A red icon indicates a current issue, a yellow one that was observed since the device booted up |
←
|
Undervoltage detected |
| Make sure your power supply and cabling are providing enough power to the Raspberry Pi (3A minimum) |
|
Overheating detected |
| Frequency capping due to overheating, please improve cooling of the Raspberry Pi |
|
Raspberry Pi's health is at risk |
| This is not a drill! A red icon indicates a current issue, a yellow one that was observed in the past |
|
Fan failed |
| A fan error occured, please check the log |
System
| Runtime preferences & tools |
Web interface settings
| Interface style: |
|
| Ask page close confirmation: |
|
| Expand for the entire tab by default: |
|
| Suspend stream when tab is not active: |
|
| Bad link mode: |
|
Release keys on the host immediately |
| Mute KB/M: |
|
Don't send keyboard & mouse events |
| Mouse jiggler: |
|
Prevent the host from sleeping |
|
WebRTC is not supported by this browser |
|
Direct H.264 streaming is not supported |
|
H.264 is not supported by this browser |
| Resolution: | |
| Video mode: |
|
| Orientation: |
|
Video quality settings
| FPS limit: |
|
||
| JPEG quality: |
|
||
| H.264 kbps: |
|
||
| H.264 gop: |
|
| Multimedia: |
|
Turns everything on or off at once | ||
| Audio volume: |
|
|||
| Microphone: |
|
|||
| Camera: |
|
|||
| Keyboard mode: | |
| Mouse mode: | |
| Shortcuts magic: |
Keyboard & mouse settings
| Sync Caps Lock state to the host: (Requires working Caps led) |
|
| Swap Left Ctrl and Caps keys: |
|
| Mouse polling: |
|
| Show the blue dot in the absolute mode: |
|
| Relative sensitivity: |
|
||
| Relative boost factor: (Firefox on Wayland) |
|
||
| Squash relative moves: |
|
| Scroll rate: |
|
|||||
| Cumulative scrolling: |
|
|||||
| Reverse scrolling: |
|
| Connect KB/M: |
|
Control keyboard & mouse emulator |
| Connect main USB: |
|
Simulate plug/unplug a USB cable |
| Enable locator LED: |
|
ATX
Drive
Mass Storage Drive:
|
Mass Storage Drive is offline |
|
Current image is broken! |
| Perhaps uploading was interrupted |
|
Current image is too big for DVD! |
| The maximum is 31.6GiB. Please switch to the Flash mode. |
|
Current image is out of storage |
| This image was connected manually using kvmd-otgmsd |
|
Read-write mode is enabled |
| Do not turn off PiKVM while this is active to prevent filesystem corruption. Use read-only mode where possible, as writing to SD card often can reduce its lifespan. |
 |
The image is being downloaded from PiKVM |
| Please wait |
|
|
|||||||||
| Image: | |||||||||
| Mode: |
|
Writable: |
|
||||||
|
Another user uploading an image |
|
Specify a new image and start uploading |
|
Don't close the browser page until the upload is complete. To speed up the process, you can close the stream window. |
| Local file: | |
| Or remote URL: | |
| Upload partition: | |
| New image: | |
| Upload size: | |
Macro
Text
Switch
|
Good news! Your switch is ready to get the firmware update |
| Please follow the instructions when you decide to install it. |
EDIDs collection
|
||||||||||||||||
Device color scheme
| Selected port: | ||||
| Inactive port: | ||||
| Blinking beacon: | ||||
|
|
|
|
|
|
| Flashing downlink: | ||||
| Bootloader mode: |
Interface settings
| Ask ATX click confirmation: |
|
| Confirm switching when the Drive is connected: |
|
